Categories

CENTRIFUGAL PUMP Stainless Steel - 4800 GPH - 1 Hp - 230/460V 3 PH 1.5" Ports

(No reviews yet) Write a Review
$1,860.21
SKU:
VIR282K98





*WE OFFER FREE SHIPPING TO ANYWHERE IN THE CONTIGUOUS (LOWER 48) UNITED STATES.  ALL OTHER DESTINATIONS, PLEASE CONTACT US FOR A FREIGHT QUOTE*

________________________________________________________________________________________________________________

Model: VIR282K98

Condition: New

Description: Centrifugal Pump - Industrial/Commercial

Features: 4800 GPH (80 GPM) - 1 Hp - 230/460V - 3 Phase - 4/2 Amps - 35 PSI - 1.5" NPT Threaded Suction & Discharge Ports - Stainless Steel Construction - Highly Resistant to Rust, Corrosion, Erosion & Chemicals - Chemical & Corrosion Resistant Viton Seals - Self-Priming to 20 Ft - Dual Volute Design - Self-Cleaning, Clog Resistent Impeller - Handles Solids up to 3/8" - Made in the USA

Payment Options: We Accept all Major Credit Cards, Personal & Business Checks, Bank Wire Transfers and Financing Through PayPal Credit and Capital Financing Through

Shipping: We Ship Worldwide via Air, Ocean and Common Carrier.  Contact us for a Freight Quote if Shipment is going Outside of the Lower 48 United States 

Discounting: We offer Multiple Item Purchase Discounts - Please Inquire

______________________________________________________________________________________________________

 

SEE OUR FULL LINE OF CENTRIFUGAL PUMPS BY FOLLOWING THIS LINK: OUR CENTRIFUGAL PUMP LINE

 

This Series of Centrifugal Pumps are Available in the Following Configurations:

Construction: Stainless Steel & Cast Iron

Inlet/Outlet Diameters: 1.5"

Flow Rates: 3600 GPH (60 GPM) through 7080 GPH (118 GPM)

Motor Sizes: 1/2 Hp through 3 Hp (ODP & TEFC)

Voltages: 115/230V, 230/460V & 230V

Phase: 1 & 3

Available Options: Silicon Carbide/Viton Seal and Check Valve (factory installed), EPDM/EPR Seal, O Ring and Flapper (factory installed).  This pump can also be built in a explosion proof/hazardous location configuration and in a stainless steel configuration (please inquire )

 

We carry a full line of fans, coolers and blowers as well as a full line of accessories and components throughout the year.  We manufacture to order here in the USA

 

Questions?  Give our Customer Service Department a Call

 

Description & Specifications:

  • Industrial/Commercial Heavy Duty Stainless Steel Centrifugal Pump
  • Our line of USA made industrial/commercial centrifugal pumps are designed for continuous operation and recommended for use in applications that require high volume liquid transfer, waste water drainage, processing and similar applications
  • Features: Stainless steel construction is recommended for use in applications where rust and/or corrosion can develop in systems and is also highly resistant to erosion and chemicals, self cleaning clog resistant impeller capable of handling solids up to 3/8" diameter, built in flapper/check valve which enables consistent self-priming up to 20 Ft, dual volute design reduces radial load on motor, pumps in this series with 1 phase motors feature automatic thermal overload protection
  • Note: this pump is also available in cast iron construction 
  • Pump Type: Centrifugal - Stainless Steel - High Volume - Industrial/Commercial
  • Motor: 1 Hp
  • Voltage: 230/460V
  • Phase: 3
  • Hertz: 60
  • Motor Type: TEFC
  • Amp Draw @ 115V - 4
  • Amp Draw @ 230V - 2
  • Suction Port: 1.5" NPT Threaded
  • Discharge Port: 1.5" NPT Threaded
  • Flow: 4800 GPH (80 GPM)
  • PSI: 35
  • Maximum Total Head: 80 Ft
  • Construction: 300 Series Cast Stainless Steel (also available in cast iron)
  • Volute: Dual
  • Seals: Viton (chemical and corrosion resistant)
  • Impeller: Self-Cleaning / Clog Resistant
  • Solids Handling Capacity: 3/8"
  • Flapper/Check Valve: Built-In
  • Priming: Self-Priming to 20 Ft
  • Maximum Temperature: 180ºF
  • Includes mounting base and built-in carry handle
  • Power Cord: N/A - this is a hardwire pump.  We recommend a licensed and insured electrician to run power to this pump
  • Note: we carry a full line of accessories including hoses, strainers, seal kits, wheel kits and more, please inquire
  • Optional Item: Model EPHLC - Explosion Proof/Hazardous Location Configuration - (please inquire
  • Optional Item: Model VIRSCVS - Silicon Carbide/Viton Seal & Viton Check Valve - Factory Installed - (please inquire
  • Optional Item: Model VIREPDM/EPR - EPDM/EPR Seal, O-Ring & Flapper - Factory Installed - (please inquire
  • Overall Dimensions: 16.3" L x 9.1" W x 9.9" H
  • Weight: 57 Lbs
  • 1 Year Warranty (Includes Parts & Labor)
  • Made in the U.S.A.

 

*WE OFFER FREE SHIPPING TO ANYWHERE IN THE CONTIGUOUS (LOWER 48) UNITED STATES.  ALL OTHER DESTINATIONS, PLEASE CONTACT US FOR A FREIGHT QUOTE*


Powered by eBay Turbo Lister
The free listing tool. List your items fast and easy and manage your active items.