Categories

CENTRIFUGAL PUMP Explosion Proof - Self Priming - 3" Ports - 7.5 Hp 230/460V 3P

(No reviews yet) Write a Review
$5,030.87
SKU:
RVIR2876X5

*WE OFFER FREE SHIPPING TO ANYWHERE IN THE CONTIGUOUS (LOWER 48) UNITED STATES.  ALL OTHER DESTINATIONS, PLEASE CONTACT US FOR A FREIGHT QUOTE*

________________________________________________________________________________________________________________

Model: VIR2876X5

Condition: New

Description: Centrifugal Pump - Explosion Proof / Hazardous Location - Self Priming - Industrial/Commercial

Features: 3" Suction & Discharge - 23,400 GPH (390 GPM) - 7.5 Hp - 208-230/460 Volt - 3 Phase - 20/10 Amps - 48 PSI - 110 Ft Head - 3/8" Solids Handling Capacity - 180ºF Maximum Temperature - Self-Priming to 20 Ft - Cast Iron Construction - Designed for a Broad Range of High Capacity Applications Including Dewatering, Liquid Transfer, Circulation, Drainage, Irrigation and Similar - Dual Volute Design - Center-line Discharge Prevents Vapor Locking -  Self Cleaning, Semi-Open Stainless Steel Impeller - Built in Check Valve - Fill and Drain Plugs for Easy Installation and Service - Available in Explosion Proof/Hazardous Location Configuration (please inquire) - Made in the USA

Payment Options: We Accept all Major Credit Cards, Personal & Business Checks, Bank Wire Transfers and Financing Through PayPal Credit

Shipping: We Ship Worldwide via Air, Ocean and Common Carrier.  Contact us for a Freight Quote if Shipment is going Outside of the Lower 48 United States

Discounting: We offer Multiple Item Purchase Discounts - Please Inquire

______________________________________________________________________________________________________

 

SEE OUR FULL LINE OF COMMERCIAL & INDUSTRIAL WATER PUMPS BY FOLLOWING THIS LINK: OUR LINE OF COMMERCIAL & INDUSTRIAL WATER PUMPS

 

This Series of Centrifugal Pumps are Available in the Following Configurations:

3 Hp - 230V - 1 Phase - 16 Amps - 255 GPM - 65 Ft Head - 28 PSI - 3" Inlet/Outlet

3 Hp - 208-230/460V - 3 Phase - 10/5 Amps - 255 GPM - 65 Ft Head - 28 PSI - 3" Inlet/Outlet

5 Hp - 230V - 1 Phase - 21 Amps - 325 GPM - 90 Ft Head - 39 PSI - 3" Inlet/Outlet

5 Hp - 208-230/460V - 3 Phase - 14/7 Amps - 325 GPM - 90 Ft Head - 39 PSI - 3" Inlet/Outlet

7.5 Hp - 230V - 1 Phase - 31 Amps - 390 GPM - 110 Ft Head - 48 PSI - 3" Inlet/Outlet

7.5 Hp - 208-230/460V - 3 Phase - 20/10 Amps - 390 GPM - 110 Ft Head - 48 PSI - 3" Inlet/Outlet

 

Available Options: Explosion proof/hazardous location configuration, Viton Seal, O Ring and Flapper Valve (factory installed), Silicon Carbide/Viton Seal, O Ring and Flapper Valve (factory installed)

 

We carry a full line of pumps in electric, gas and diesel engine, belt and direct drive configurations as well as a full line of accessories and components throughout the year.  All of our pumps are manufactured and factory tested before shipment here in the USA

 

Questions?  Click the "Contact Seller" Link Above or Find us on the Web at Streamline Industrial a VirTau Company

 

Description & Specifications:

  • Industrial/Commercial Explosion Proof / Hazardous Location - Self-Priming Centrifugal Pump
  • Our line of USA made industrial/commercial centrifugal pumps are designed for continuous operation and recommended for use in dewatering, liquid transfer, circulation, drainage, irrigation and similar applications
  • This series of industrial/commercial centrifugal pumps is available with 3" threaded suction and discharge ports 
  • Features: Self-priming, dual volute design to reduce radial load on motor, centerline discharge prevents vapor locking/binding and provides convenient piping connections, self-cleaning, semi-open stainless steel impeller, 3/8" solids handling, built-in check valves for fast priming and fill and drain plugs for easy installation and maintenance and servicing
  • Pump Type: Centrifugal - Industrial/Commercial
  • Suction Port: 3" NPT Threaded
  • Discharge Port: 3" NPT Threaded
  • Flow: 23,400 GPH (390 GPM) 
  • Motor: 7.5 Hp - TEFC
  • Voltage: 208-230/460V
  • Phase: 3
  • Amp Draw @ 208/230V: 20
  • Amp Draw @ 460V: 10
  • PSI: 48
  • Solids Handling: 3/8"
  • Total Head: 110 Ft
  • Maximum Temperature: 180ºF
  • Construction: Cast Iron
  • Impeller: Stainless Steel - Self-Cleaning - Semi-Open
  • Sleeve: Stainless Steel
  • Voluge: Dual
  • Seal, Check Valve & O Ring: Buna-N Mechanical (optional Viton and Silicon Carbide available - see Optional Items below)
  • Self-Priming: to 20 Ft
  • Power Cord: N/A - this is a hardwire pump.  We recommend a licensed and insured electrician to run power to this pump
  • Optional Item: Model VIR287X300V0 - Viton Seal, O Ring & Flapper Valve - Factory Installed - (please inquire)
  • Optional Item: Model VIR287X300VS - Carbide/Viton Seal, O Ring & Flapper Valve - Factory Installed - (please inquire)
  • Optional Item: Model VIRA20090 - Mounting Base for 182, 184 & 215 JM Frames - Factory Installed - (please inquire)
  • Optional Item: Model VIRA200K0 - Motor Base - Factory Installed - (please inquire)
  • Overall Dimensions: 26.6" L x 12" W x 11.8" H
  • Weight: 176 Lbs
  • 1 Year Warranty (Includes Parts & Labor)
  • Made in the U.S.A.

 

*WE OFFER FREE SHIPPING TO ANYWHERE IN THE CONTIGUOUS (LOWER 48) UNITED STATES.  ALL OTHER DESTINATIONS, PLEASE CONTACT US FOR A FREIGHT QUOTE*