Categories

CENTRIFUGAL CHEMICAL PUMP - Cast Iron - 1.25" Ports - 115-208/230V - 5100 GPH

(No reviews yet) Write a Review
$1,169.67
SKU:
WA12SP10C1P

 

*WE OFFER FREE SHIPPING TO ANYWHERE IN THE CONTIGUOUS (LOWER 48) UNITED STATES.  ALL OTHER DESTINATIONS, PLEASE CONTACT US FOR A FREIGHT QUOTE*

________________________________________________________________________________________________________________

Model: WA12SP10C1P

Condition: New

Description: Centrifugal Pump - Cast Iron - Commercial/Industrial

Features:  5,100 GPH (85 GPM) - 1 Hp TEFC - 115-208/230V - 1 Phase - 12/6 Amps - 26.4 PSI - 56J Frame/Mounting Base - 1.25" NPT Threaded Suction Port / 1.25" NPT Threaded Discharge Port - Cast Iron Construction - Recommended for Chemical and Liquid Transfer - Self Cleaning, Clog Resistant Impeller - 3/8" Solids Handling Capacity - EDPM/ EPR Seals for Liquid Chemical Transfer (Verify chemical capability with liquids) - Built-In Check Valve, Self Priming to 20 Feet - 303 Stainless Steel Shaft From Engine - Easy Clean Out Design - Made in the USA

Payment Options: We Accept all Major Credit Cards, Personal & Business Checks, Bank Wire Transfers and Financing through  and through

Shipping: We Ship Worldwide via Air, Ocean and Common Carrier.  Contact us for a Freight Quote

Discounts: We Offer Multiple Item Purchase Discounts - Please Inquire Click the "Ask a Question" Link Below

______________________________________________________________________________________________________

 

SEE OUR FULL LINE OF CENTRIFUGAL PUMPS BY FOLLOWING THIS LINK: OUR CENTRIFUGAL PUMP LINE

 

This Series of Industrial/Commercial Straight Centrifugal Pumps are Available in the Following Configurations:

Flows: 3,300 GPH (55 GPM) to 7,800 GPH (130 GPM)

PSI Ranges: 20.3 to 43.3

Motor Sizes: 1/2 Hp to 3 Hp

Voltage/Phase: 115-208/230V, 1 Phase, 208/230V, 1 Phase and 208-230/460V, 3 Phase

Suction/Discharge Ports: 1" Inlet/1" Outlet - 1.25" Inlet/1.25" Outlet - 1.5" Inlet/1.5" Outlet - 2" Inlet/ 2"Outlet

Head Ranges: 47 to 100 Ft

 

Available Options: Explosion Proof/Hazardous Location Configuration

 

Questions? Ask our Experts  Click the "Ask a Question" Link Below

 

Description & Specifications:

  • Industrial/Commercial Heavy Duty Cast Iron Straight Centrifugal Pump 
  • Our extensive line of USA made industrial/commercial centrifugal and straight centrifugal pumps are designed for continuous operation and are recommended for use for chemical and liquid transfer, recirculation, booster service, dirty water and similar industrial/commercial applications.   
  • Features: heavy duty cast iron construction, EPDM/EPR mechanical seals, built in check valve for fast priming, NEMA 56J motors with stainless steel shafts, self priming to 20 feet, available in 50/60 Hz TEFC single or three phase motors, self cleaning, clog resistant impeller, handles liquids of specific gravities up to 1.3, easy clean-out design, dual volute design reduces radial load on motor, Not for use with petroleum based liquids
  • Pump Type: Centrifugal - Industrial/Commercial
  • Frame: 56J
  • Motor: 1 Hp
  • Voltage: 115-208/230V
  • Phase: 1
  • Hertz: 60
  • Motor Type: TEFC
  • Amp Draw @ 115-208V: 12
  • Amp Draw @ 208/230V: 6
  • Suction Port: 1.25" - NPT Threaded
  • Discharge Port: 1.25" - NPT Threaded
  • Flow: 5,100 GPH (85 GPM)
  • Pressure: 26.4 PSI
  • Maximum Total Head: 61 Ft
  • Maximum Working Pressure: 125 PSI
  • Construction: Cast Iron
  • Impeller: Clog Resistant, Self-Cleaning
  • Seal: EPDM/EPR for Liquid Chemical Transfer with Specific Gravities Up to 1.3.   
  • Solids Handling Capacity: up to 3/8" Semi Solid
  • Priming: Self Priming to 20 Ft - Built In Check Valve
  • Maximum Temperature: 180ºF
  • Maximum Flow: 130 GPM
  • Not for use with petroleum based liquids (for petroleum based liquids we offer a full line of explosion proof/hazardous location pumps)
  • Power Cord/Plug: N/A.  This is a hard-wire pump.  We recommend a licensed and insured electrician to run power to this pump
  • Note: we carry a full line of accessories including hoses, strainers, seal kits, wheel and dolly kits and more.  Please inquire Click the "Ask a Question" Link Below
  • Overall Dimensions: 18.8" L x 9.3" W x 9.3" H
  • Ship Weight: 61 Lbs
  • 1 Year Warranty - Includes Parts & Labor  
  • Made in the USA

 

*WE OFFER FREE SHIPPING TO ANYWHERE IN THE CONTIGUOUS (LOWER 48) UNITED STATES.  ALL OTHER DESTINATIONS, PLEASE CONTACT US FOR A FREIGHT QUOTE*